1  

Use an In-line Strainer 211 or Permanent Wire Tightener G643044 for tightening the fence. The fence is tight when there is no sag of wire between posts.

 2

Use the Super W Insulator G676144-White or G676044-Black for EquiFence on soft wood posts, T-Posts with Universal T-Post Insulator G682134, or T-Posts with T-Post Sleeve with Cap VTPS60 and the Super W Insulators.

 4

To join two rolls of EquiFence, strip off 2" of each end of the EquiFence to be joined. Insert the ends into the EquiFence Joiner H101.

 5

If you use more than one wire in your fence, the wires need to be interconnected. You can do this with the use of a Joint Clamp G603934-Wing nut.

 6

You can use a Bungee Gate G640504 or Gate Kit G641104 to make gateways. Of course, you can also use a standard steel gate.

 7

Gallagher recommends Double Insulated HD Underground Cable G627014-Black or G627044-White for connecting the fence to the energizer. Use one of the bottom Joint Clamps in the fence to connect the HD Underground cable to the fence.

Use a Cut-Off Switch G607624-Yellow, G607634-Green, or G608704-Red if you want to switch the power On and Off at the fence. Place the Cut-Off Switch in the HD Underground Cable between the energizer and the fence. Mount the Cut-Off Switch to a post.