STRAIGHT GUIDANCE

Let's Get It Straight -- To do straight guidance, press "Straight Guidance" button. After showing the Outback^® S-Lite where to start and which direction to go, it takes over and begins guiding on perfectly straight, parallel passes spaced exactly the width entered during setup.

In straight mode, the passes are predefined. Even if the driver gets off on one pass, the mistake won't be repeated on the next pass. The operator can do straight passes in any order, skip some and come back if desired. As the driver moves from one pass to the next, guidance snaps to the next pass automatically.

STOP GUIDANCE
"Time For Lunch!" -- Oh, those details. So we need to leave the field for some reason. Just press the "Stop Guidance" button and then select "Return Here". This saves the job and the last point. The driver will be able to guide back to the last point and then resume the job with everything in memory just like it was left.

All Finished -- Then when when the job is finished press the "Stop Guidance" button. Then choose "Erase Memory". The memory will be erased and the Outback^® S-Lite is ready for the next one.

Steering Guide^TM

It's What's Ahead That Counts -- The Steering Guide ™ looks ahead. Unlike a light bar, it provides heading information rather than course deviation. It's true steering guidance. Match the nose heading of the tractor to the Steering Guide™ and you're set. This "look ahead" steer instruction is much easier and more accurate than a light bar and makes anyone a better driver.

Easy Installation and Setup

Outback® Antenna Mount - The magnetic, slimline antenna mounts to the top of the cab. This is a great mount for quick installation and for the occasional low branch. A metal plate is provided which adheres permanently to the fiberglass shell. No holes need to be drilled.
Outback® Mounting System - The Outback® S-Lite mounts right behind and above the steering wheel. Choose a place on the cab window, wipe with a damp cloth and mount the Outback® S-Lite with a twist of the vacuum pump. The bracket can be positioned or rotated in almost any configuration desired and even mounts on curved glass.

Specifications

Outback® S-Lite Special Features -- The Outback® S-Lite includes an adaptable power cable to plug into the power source of your choosing:         •Standard cigarette lighter outlet         •Dickey John RVSII cable (4 pin) - to provide ground speed         •Raven ground speed adapter cable (3 pin) - to provide ground            speed (Available at an additional cost of $45.00) The Outback® S-Lite features the following display options:         •True ground speed and heading         •Perimeter area - for accurate field size measurement         •A=B Line - to adjust for satellite drift         •Language selection (English, Spanish, French, etc.)         •Light brightness adjustment         •GPS signal quality - 3-4 bars typical The Outback® S-Lite is not compatible with eDriveTC™, 360 mapping or hitch system. It is compatible with Automate, Outback's new boom control system for sprayers - call for details.
Outback® and GPS: What Makes It Tick? -- The Outback® GPS Guidance uses advanced digital technology. It's dependable and extremely accurate. All it takes to run the Outback® S-Lite is approximately 12 Volts DC and 1AMP.
A Word About Correction - Outback® S-Lite is available with WAAS and e-Dif correction. Both work fantastic for guidance. The GPS and correction signals come from satellites so there are no black-out areas. WAAS is available in most of North America and is free. E-Dif, while not quite as accurate or repeatable, can keep youo going in the event the WAAS system goes down.
Power Supply...............................................................................   Receiver Channels..................................................................... Position Update Rate................................................................ Differential Type.........................................................................   Cable Lengths.............................................................................   Input/Output Connections........................................................ Memory......................................................................................... 9 to 36 VDC (1 Amp) Reverse Polarity Protected 12 10 Hz SBAS (WAAS) e-Dif Power - 13 feet Antenna - 16 feet RS-232 NMEA and CAN Up to 30.56 hours